Eyepiece projection adapter designed for use with all webcams fitted with any 1.25" webcam adapters. Allows you to greatly increase image scale by coupling the webcam directly to eyepiece. By adjusting the camera positions you can vary image scale. Designed for use with very lightweight cameras, such as webcams, and is not for use with heaver CCD or film cameras!
Anodised extender tube for eyepeice projection. Fits a 1.25" focuser. Grub screw secures eyepeice. Provides a T-Thread interface to your camera.
Screws onto a T-Thread and provides a 1.25" hole to recieve etheri an eyepiece or web cam adapter. Grub screw on 1.25" interface.
The para focal ring fits over a 1.25" barrel and is held in place with a set screw. This enables you to make a eyepeice para focal with your web cam which greatly reduces focusing problems. Very handy unit.
A clear coated window mounted in a filter thread enclosure. Used to protect your CCD from dust while you image through it. You can mount further filters on this item
This fits the rear port of a Meade ETX Series Scope (60 through to 125) and gives you a 1.25" receiver which you can insert a Web Cam adapter.
A dust cap for a T-Thread aperture. Could be used on a filter wheel or camera such as the SAC8
A dust cap for a Male T-Thread aperture. The CAP-TF has a female T-Thread. It could be used on a filter wheel or camera such as the SAC8
T-Thread coupler. Male Thread at one end and female T-Thread at the other end. Total length is 10mm. Adds about 7mm to optical path length.
T-Thread coupler. Male SCT thread and female T-Thread at the other end. Total length is 16mm. Adds abour 8mm to optical path length.
T-Thread coupler. Female Thread at one end and female T-Thread at the other end. Total length is 10mm. Adds abour 3mm to optical path length.
Male T-Thread to 2 inch focuser tube. Includes a 2 inch filter thread.
Male SCT Thread to 2 inch focuser tube. Includes a 2 inch filter thread.
Male 2" filter thread fitting stepping down to hold a 1.25" filter. Fit 1.25" filters to your 2" eyepiece or 2" barrel CCD camera. Vignetting may be an issue in some applications.
Male T-Thread to 1.25 inch focuser tube. Includes a 1.25 inch filter thread.
CS-Mount to C-Mount coupler. Male C-Mount thread at one end and female C-Mount Thread at the other end. Total length is 5mm. You can then fit C MOunt lenses to CS mount cameras. Same thread different backfocus/reference distances. Also useful for using SLR Lens Adapters (which are all built C mount backfocus on this site) on CS mount cameras.
C-Mount to T-Thread coupler. Male C-Mount thread at one end and female T-Thread at the other end. Total length is 10mm. Adds abour 3mm to optical path length.
C-Mount to T-Thread coupler. Male C-Mount thread at one end and male T-Thread at the other end. Total length is 10mm. Adds abour 3mm to optical path length.
The TRIPOD25 is a tripod mount extender. It extends 25mm above the 1/4-20 tripod attachment point to allow your SLR adapter, lens, or camera to clear the mounting hardware. It screws on to the tripod mount and has a tripod mounting screw on top.
The TRIPOD50 is a tripod mount extender. It extends 50mm above the 1/4-20 tripod attachment point to allow your SLR adapter, lens, or camera to clear the mounting hardware. It screws on to the tripod mount and has a tripod mounting screw on top.
This 1.25" filter holder fits inside the Camera T-Thread mount. Similar to the DSI IR filter shipped from Meade. You are able to screw a 1.25" filter into this holder and then hold the filter between the camera and SLR adapter. For use with DSI and other T-Thread mounted cameras.
T-Thread coupler. Male T-Thread at one end and Female SCT Thread at the other end. Total length is 16mm. Adds abour 8mm to optical path length.
T-Thread coupler. Male Thread at one end and male T-Thread at the other end. Total length is 10mm. Adds abour 3mm to optical path length.